|
Standard Lenses / 3-CCD Lenses
C-mount lenses of our standard series can be used for sensor sizes up to 2/3", some of them
even up to 1" format. Two of the lenses have a very high relative aperture of 0.95 which results in
excellent image quality even under low illumination conditions. Besides the fixed focal length
lenses, two zoom lenses are available – one of them also in motorized version. The two lenses of
the 3-CCD series are designed for 3-CCD colour cameras with a maximum sensor size of 1/3".
The special lens design considers the colour beam splitter and the small depth of insertion of
such cameras.
Further informations in our overview .
|
|
 |
|
|
Compact Series
Optically and mechanically designed for the specialized needs of industrial image processing,
these lenses are an invaluable component for high-end machine vision systems. In accordance
with the spectral sensitivity range of common CCD and CMOS sensors, the 2/3" lenses are
corrected and broadband coated for the spectral range of 400-1000nm (VIS+NIR). The lenses for larger sized sensors up to a diagonal of 22mm are also broadband coated and may be used
alternatively in the visible or near infrared range. The robust mechanical design with lockable
focus and iris setting mechanism guarantees long-term stability even in typical production
environments.
Further informations in our overview.
|
|
 |
|
|
C-Mount Lenses IR (400-1000mn)
The 2/3" C-Mount lenses are designed for a spectral range of 400-1000 nm and can be used
in the visible and near infrared range, practically without focus difference. The high optical
performance is achieved by a sophisticated optical design and the use of ultra low
dispersion glass. A special broadband coating reduces stray light and increases
transmission over the whole spectral range. The lenses are available with manual, motorized
or video signal controlled iris, which makes them suitable for video surveillance as well as for
technical applications.
Further informations in our overview.
|
|
 |
|
|
MACRO System
The compact and robust Macro System, consisting of SCHNEIDER enlarging lenses in a special diaphragm body, helical mount, extension rings and camera adapters, is the best choice for close-up and macro images of outstanding quality. The system can be adapted on many different cameras for photographic, industrial and scientific applications. The lenses can be mounted in reverse position for enlarged imaging without any additional accessory.
Further informations in our overview.
|
|
 |
|
|
Bilateral Telecentric Lenses
The bilateral telecentric lenses for matrix and linescan cameras set a new standard of lens
performance for optical metrology. The absolute distortion in the image plane of these lenses is
only a few micrometers. The lenses can be focussed on the image side in a range of +/- 3mm,
which means that the working distance can be adjusted within the defined limits without any
change in the lens magnification. Thus the lenses can easily be adjusted to fit the space
conditions in the application. With the numeric aperture of 0.14 or 0.13, the light intensity of these
lenses is remarkably higher than other lenses in the market. The integrated iris allows easy
setting and locking for the demands of any measurement task.
Further informations in our overview.
|
|
 |
|
|
|
Unifoc 58/76
The helical focusing mounts UNIFOC 58 and UNIFOC 76 are especially designed for the use of SCHNEIDER enlarging lenses in combination with linear and area CCD cameras. This combination allows the imaging of small objects with an extraordinary high image quality.
Further informations in our overview.
|
|
 |
|
|
|
|
|
No guaranty is given for he indicated facts in this document. Changes of technical specifications or our range of supply can be made
without prior notice. Some used terms or names may be covered by trademarks of the respective companies. |
|
